I had a similar problem to yours on my Sony S series vaio laptop. cyrus7580 says: February 8, 2010 at 9:03 AM This is kind of bugging me bc it seems like I (and Mx) are very close to having this working; the thing compiles Sometimes there is a day or so between Fedora upgrading their kernel and RPMFusion building a new kmod-catalyst- package. XV22 says: August 11, 2010 at 9:17 AM I did have problems just like you, I thought ATI is shit and NVidia is the best (I already have 2 nvidia cards news
Anyway, if you look at the command there are 2 different dashes. If you'd like to contribute content, let us know. Fedora 18 fresh out and ATI latest driver version 13.1 dont support it. Setup RPMFusion There are instructions on http://www.rpmfusion.org/ but this should do it. http://forums.fedoraforum.org/showthread.php?t=279600
rpm -e -force auditthen reissue the command again.Regards,Sohail Riaz Sohail Riaz says: May 21, 2013 at 12:00 [email protected]: Are you sure new-kernel-pkg command works well for you because it will create This is easier and works for me. But the free drivers are nowhere as good as the one from ATI's site.
blackcurrent7 says: September 19, 2010 at 9:14 AM Before proceeding any further, i wanted to confirm if the steps are valid for Fedora 13 and driver version 10.9 XV22 says: September I know a lot of answers have been live with it or buy a nvidia card. Let me ask this: When Fedora is booting and you have the blue screen with the white area that fills up with the logo… is that X running there or is Since I am not able to find any solution, would you please give me some advice on what am I doing wrong?
For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration. Output of standard tests shown below: [[email protected] ~]$ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. Reboot the Linux and the fglrx should be enabled by default now.Related posts:Installing NVIDIA Driver in Fedora Installing akmod NVIDIA Driver on Fedora How to Install, Run and Uninstall VMware Player https://ask.fedoraproject.org/en/question/8765/why-do-ati-driverscatalyst-not-work-with-fedora-16/ Bub says: February 7, 2010 at 5:47 PM As an FYI - If the dkms package is installed, the Catalyst installation seems to use it and the install log file is
This method is covered in the section "Pre-built packages from RPMFusion". CrazyGuy158 View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by CrazyGuy158 Page 2 of 3 < 1 2 3 > Thread Tools Show Jack reports this type of problems with ATI Catalyst 10.11 Proprietary Drivers with ATI Radeon HD 4600 Series graphic card. I think you'll also be able to update your system via yum.
The forums at phoronix.com and fedoraforum.org are probably the best place to get specific help with proprietary graphics drivers. http://www.sohailriaz.com/how-to-install-ati-radeon-drivers-in-fedora-18/ Choose Ubuntu instead Ben Davis says: July 27, 2010 at 11:29 PM Don't just jump straight onto Ubuntu - Fedora is a great operating system. User Name Remember Me? I am running Fedora core 12, on a hp 6735s laptop.
I'm currently writing this from a LiveCD boot-up. http://advianetwork.com/ati-driver/ati-driver-fedora-core-3.html I've been using the free drivers for a few years now, and find they work well. It told me it would be wise to reboot and so I did.. Additionally, I also tried to install from rpmfusion: yum install xorg-x11-drv-catalyst which has been reported by someone that could work, however, I still get the same black screen, until I remove
I am currently holding a Senior Support Engineer post at ARAMCO Oil Company Saudi Arabia. This step is not necessary. If you need 3D Hardware support, don't use Fedora 13. http://advianetwork.com/ati-driver/ati-driver-fedora-18.html That will pull in the full driver.
I am only too happy to help. edit flag offensive delete link more Your Answer Please start posting anonymously - your entry will be published after you log in or create a new account. I'm sure once I turn on triplebuffer and a few other things it'll be even better.
Ian says: February 26, 2010 at 11:50 PM Same problem for me. I can't seem to mount my entire drive, only its partitions. On one occastion i was able to get in the desktop but had massive performance issues, even added the swcursor false option to the xorg.conf (which really threw me off in if u still get the error about "can't unload radeon", make sure u have followed the steps, after u "init 3″, try: gdm-stop rmmod -f radeon XV22 says: October 1, 2010
I am not using "nomodeset" if boots which F15/16 did not do without "nomodeset" now just diving into the screen flicker/freezes. You will need at least version 11.11 (or greater) of the ATI driver for Fedora 16, earlier versions will not work with the version of Xorg that F16 ships with. Even if this didn't work, I decided to continue. http://advianetwork.com/ati-driver/ati-driver-fedora-17.html A full reinstall wouldn't be necessary, would it?
Requirements The Amd-driver-installer from Amd.com will work best in most cases if there is no xorg.conf file present before you begin the installation process. Bonk says: May 3, 2013 at 1:47 amI'm not having any luck copy/pasting any of the offerings. If you are getting the following message in your /usr/share/ati/fglrx-install.log: [Message] Kernel Module: Found kernel module build environment, generating kernel module now. says: August 20, 2013 at 5:32 pm[…] is not enabled") then you can download and configure nVidia drivers using easyLife or you can look here for AMD/ATI driver instructions (they were
You are currently viewing LQ as a guest. I ctrl-alt F2 and log into root, and try to xstart to see what error I am getting and it is stating that there is no monitor found. Albert Trotter says: sir i am facing error t line 14 of exim.conf... Dont be amaze by seeing AMD Testing use only at right bottom of your screen.
Page 1 of 2 1 2 > Thread Tools Search this Thread Display Modes #1 9th May 2012, 02:04 AM paxile2k Offline Registered User Join Date: Mar EDIT: Yeah, I tested this myself. Registration is quick, simple and absolutely free. Change root user su - ## OR ## sudo -i 2.
And since ATi have just released Catalyst 10.7 it does now work with Fedora 13.