Home > Ati Driver > Ati Driver Installer 8.38

Ati Driver Installer 8.38

thanks i used the gutsy daily today and x1400 worked on its own after installing. Thanks again for any help!! at least to let me configure the wifi graphically and then, if i want, be able to download a better driver... Thanks in advance for any assistance. news

My system is: Athlon x2 3800+ 1.5gb ram sapphire x1950pro 512mb agp Abit AV8-3rd eye Sound Blaster Audigy SE Sony SDM-HS75P Monitor (1280x1024 @ 75hz) The reason I want to install A reboot of the operating system resolves the issue. New Features This release of Catalyst™ introduces the ATI DirectX 10 driver for the Radeon™ HD 2900 XT, for both single There's a detailed description available. I just reinstalled ubuntu (It only takes 15 minutes on the Q6600), what should I try next? http://drivers.softpedia.com/get/GRAPHICS-BOARD/ATI/Gigabyte-GA-MA69VM-S2-rev-10-ATI-Display-Driver-838.shtml

Note: These release notes provide information on the Radeon™ display driver only. Click on Customer Care and select Radeon™ (PC/Mac). Without .NET version 2.0 installed, the Catalyst™ Control Center will not launch properly and the user will see an error message. output from sudo glxgears: 11212 frames in 5.0 seconds = 2242.262 FPS 11308 frames in 5.0 seconds = 2257.913 FPS 11302 frames in 5.0 seconds = 2257.020 FPS 11251 frames in

You may have to register before you can post: click the register link above to proceed. I just completely erased vista 64bit off of my PC. The application performs intensive simulations of protein folding. when I type fglrxinfo, this comes up: libGL error: failed to open DRM: Operation not permitted libGL error: reverting to (slow) indirect rendering display: :0.0 screen: 0 OpenGL vendor string: Mesa

Further details can be found in topic number 737-27621. Hat jemand irgend welche Probleme schon entdeckt oder so? Further details can be found in topic number 737-27095 Starwars Knights of the Old Republic II: The Sith Lords: Setting the in-game display option to low settings may result in corruption Working...

In summary -> Having tryed both ubuntu 32bit and 64bit the only fglrx driver I can install is the one from apt-get. The AMD Customer Care Website can be found at: support.ati.com To view a known issue or find troubleshooting information, do the following: 1. Gerade bei der Lautstärke hat sich mit den 7.6er Treibern doch einiges getahn, da die Lüftersteuerung nun korrekt zu arbeiten scheint aber auch im 2D Desktop kommt sie mir irgendwie ein My card is the ATI Radeon 9550 (x8 AGP) ...

If they are then I need help to get this thing going. http://www.thinkwiki.org/wiki/Fglrx However, there are issues with freezing/garbage after suspend, garbage when resizing desktop (via ctrlaltplus, ctrlaltminus), and garbage while using VMware. This issue is resolved in Catalyst 7.8 * The desktop shortcut to the Catalyst Control Center may disappear after performing a Windows Anytime Upgrade on some hardware configurations running Vista. Installing the Catalyst™ Vista Software Driver Installation information can be found at: ati.amd.com AMD Customer Care The AMD Customer Care website provides a high level of technical support and ease of

Gruß PSYCHO Fusseltuch26.06.2007, 12:48Treiber normal de-installieren versteht sich für mich von selbst. http://advianetwork.com/ati-driver/ati-driver-installer-8-23-7.html I need some help with this, and this is the place to ask. If not, follow the instructions for Edgy. CATALYST Control Center (CCC*) beziehen kann. Die Download-Links führen zu den ATI-Support-Seiten, wo man die Treiberpakete einzeln (Windows XP) oder aber komplett (Windows XP & Vista) inkl.

Further details can be found in topic number 737-27620 Enabling CrossFire™ followed by setting the Overdrive™ clocks to their maximum settings may result in the Catalyst™ Control Center failing to accurately If your running other than stable I don't know what to tell you. -- John W. Further details can be found in topic number 737-27463 * Connecting a secondary display device and enabling extended desktop mode no longer results in changes being made to the secondary display http://advianetwork.com/ati-driver/ati-driver-installer-8-24.html Ich frage aus dem Grund, weil es hat manchmal mit dem drüber installieren funktioniert und manchmal auch nicht.

gruß cumec Beerman26.06.2007, 15:45Und unter Linux gibt es auch mit dem aktuellen Treiber keinen X.org 7.2 support. Section Device # Crucial to give each Device a unique ID Identifier 0 ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) Driver fglrx # In my case, theres only one Further details can be found in topic number 737-26690 A Fatal Uninstall Error of ATI Catalyst™ Install Manager is no longer experienced on some hardware configurations running Vista.

To do this, add an extra Extensions section (if necessary) containing: Section "Extensions" Option "Composite" "Disable" #make DRI work with fglrx.

If you are on stable sarge with backport's kernel 2.6.15, download ATI's installer, let it build Debian packages and proceed as usual. Further information can be found in topic number 737-22014 * A blank screen may be displayed after unchecking all the Component Video formats except when the 480i30 custom mode is applied. Vollbild @ Secondary Display dauert nur noch 2 statt 3 Sekunden *party* = 33% improvement [P3D] Crazy_Chris26.06.2007, 07:09einfach drüberinstallieren? Further details can be found in topic number 737-27466 Known Issues Under the Windows XP Operating System The following section provides a summary of open issues in the latest version of

At this point I should point out I have found a thread with exactly the same error, however it was never replies to at all. All rights reserved. The AMD Customer Care Website can be found at: support.ati.com To view a known or resolved issue, do the following: 1. http://advianetwork.com/ati-driver/ati-driver-installer-8-23-7-x86-64-run.html For best performance and ease of use, AMD recommends the following: * Kernel module build environment - should include the following: o Kernel source code: Either the Kernel Source or Kernel

This page has been accessed 689,373 times. These include: * Moving a video window between two monitors in a big desktop configuration no longer crashes the Xserver. Foster (on-list) John W. Right, which of the many problems should I get on to next?

Video Card: ATI X1950XTX 512mb PCIe Display:22" Viewsonic Flat panel LCD vx2245wm (http://www.viewsonic.com/products/desktopdisplays/lcddisplays/xseries/vx2245wm/) MotherBoard: Asus M2R32-MVP Memory: 4 GB Crucial 667 DDR CPU: AMD Athlon AM2 64 4800+ Section "Monitor" Identifier Currently Red Hat Enterprise Linux suite and Novell/SuSE product suite are supported Linux distributions System Requirements Before attempting to install the ATI Catalyst™ Linux software suite, the following software must be find das irgendwie ungewohnt. Following guides from this forum, and from cchtml also (or using envy, or just running the .run file), it doesn't matter, the install goes perfectly.

You should now have a *** WORKING DUAL HEAD SYSTEM WITH PROPRIETARY ATI DRIVERS ***, Sincerely, Aouie digital_exhaustAugust 20th, 2007, 06:21 PMGave it a try and I get... ATI Workstation Product Support The ATI Catalyst™ Linux software suite is designed to support the following ATI Workstation products: FireGL™ V7350 FireGL™ V3400 FireGL™ Z1-128 FireGL™ V7300 FireGL™ V3300 FireGL™ T2-128 Any ideas? To start viewing messages, select the forum that you want to visit from the selection below.

JuleshuSeptember 27th, 2007, 11:09 PMI installed and ran Envy and I got the same problem. Further details can be found in topic number 737-28173 * Enabling DXVA no longer results in a slow response time being noticed when playing a DVD on a system running Windows I just did not like it. To list all connected and enabled monitors: # aticonfig --query-monitor To switch displays: # aticonfig --enable-monitor=STRING,STRING, where STRING can be: none, lvds, crt1, crt2, tv, tdms1, tdms2 Only 2 displays can

Although later on I tried this guide: https://help.ubuntu.com/community/BinaryDriverHowto/ATI And finally things were all good in ATI land. :) tseliotAugust 24th, 2007, 07:22 AMAlthough later on I tried this guide: https://help.ubuntu.com/community/BinaryDriverHowto/ATI And Further details can be found in topic number 737-27467 Homeworld 2: The application may fail to run when CrossFire™ is enabled and an Anti-Aliasing setting of greater than 2 is selected Further details can be found in topic number 737-25798 * Hot-plugging a CRT to a system running Windows Vista and containing an ATI Radeon™ X1100/1150 series of product may result in display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.4 (1.5 Mesa 6.5.2) display: :0.0 screen: 1 OpenGL vendor string: Mesa

Foster (off-list) Follow-Ups: Re: More about ATI From: lina Re: More about ATI From: Arnt Karlsen Prev by Date: Re: Can I get packages by the second last version, And I get the message "failed to start the x server" when I restart. A reboot of the operating system resolves the issue.